PRODUCT DATA SHEET .:: BIPRO ST ::.
| Product Name: | BIPRO ST
|
||||||||||||
Product Type: |
ANTI-BORER AND ANTI-SAPSTAIN/MOULD TREATMENT FOR FRESHLY CUT/SAWN TIMBER
|
||||||||||||
| Description: | BIPRO ST is a concentrated, water dispersible liquid formulation that contains four specifically blended insecticidal and fungicidal active ingredients to provide a wide-spectrum protection against wood borer attack as well as sapstain and mould growth on green (wet) sawn and round timbers. For maximum effect, BIPRO ST should be applied to all timber surfaces as soon as possible after processing and preferably within 12 hours after cutting, debarking and/or sawing.
|
||||||||||||
| Active Ingredients: | Synthetic pyrethroid, organosulphur compound,dicyanotetrachlorobenzene
and borates
|
||||||||||||
| Physical Characteristics: |
|
||||||||||||
| Use Restriction: | Only to be used and applied in accordance with label warnings, precautions and direction for use. Never apply product while it is raining.
|
||||||||||||
| Application: | This product can be applied to timber by brush,
dip or spray methods. BIPRO ST is supplied as a 240g/
|
||||||||||||
| Application Rates: | ±0,3
|
||||||||||||
| Dilution Rates: | Sawn timber: 1 part BIPRO ST concentrate to 19; 13 or 10 parts water, depending on timber thickness. Round timber: 1 part BIPRO ST concentrate to 7 parts water.
|
||||||||||||
Storage:
|
Storage temperatures should not exceed 35 - 40°C. Product may require stirring prior to use to ensure uniformity. | ||||||||||||
| Packaging: | 25
|
||||||||||||
| Note: | Handle with care (Observe label instructions) |
) 1,10