| Product Name: | FURNI-FLOOR | |||||||||
| Product Type: | WATER-BORNE FLOOR QUALITY VARNISH FOR INTERIOR TIMBERS (Latest water-based technology)
|
|||||||||
| Description: | Furni-Floor is a clear, water-borne varnish that provides a durable gloss finish with excellent wear resistance for use on interior wooden floors and timbers. It is quick drying and virtually odourless. After full curing, it provides a tough but flexible finish that resists scratching, staining and seals wood against water penetration. It is solvent free and non-flammable. Furni-Floor is therefore particularly suitable for use as a high quality clear coating on interior wooden floors, furniture, bar tops, stairs and stair railings, skirting boards, cladding, cupboards, etc.
|
|||||||||
| Active Ingredients: | Pure acrylic polymers and special cross-linking additives
|
|||||||||
| Physical Characteristics: |
|
|||||||||
| Use Restriction: | Only for use on interior timbers. Do not apply over any other coatings.
|
|||||||||
| Application: | Use brush or spray application methods. Mix contents before use.Dilute the first application 2 : 1 with water and use as a primer coat. Allow to dry for 2 to 6 hours depending on weather conditions, thensand lightly before applying a second coat undiluted. Allow to dryovernight and apply a third coat undiluted. Allow 24 hours drying/curing time before re-opening for traffic in the case of floors.Note: Full curing is generally achieved after 4 to 7 days to ensure proper hardness and wear resistance.
|
|||||||||
| Application Rate: | ± 15 m2 - 20 m2
per
|
|||||||||
| Dilution Rates: | Ready for use. Dilute only as indicated
|
|||||||||
Storage:
|
Storage temperatures should not exceed 40°C. Keep containers tightly closed. | |||||||||
| Packaging: | 1
|
|||||||||
| Note: | Clean equipment with water immediately after use. |
